• Using your Square Wave Generator, set the back to A/C and connect an electrode lead to Jack 1.
  • Turn the Frequency and Current knob to “Noon” or straight up.
  • Connect one end of each of the alligator clips to each end of the electrode leads and the other end of the alligator clips to each of the 99.99% silver wire rods.
  • Bring some distilled water to a boil (Distilled is VERY important as any water with chlorine will produce Silver Chloride – which can be seen as a white milky substance around the silver wire.)
  • Add an electrolyte to the water like 1/16 tsp of baking soda and mix.  Do not use salt as that contains chlorine.
  • Insert the 99.99% silver wire rods into the water and make sure they do not touch
  • Turn on the device and in roughly 5-10 minutes you will have Colloidal Silver.
  • A higher current will make colloidal silver faster, but of a lesser quality.  It is better to use a lower current for longer periods of time.
  • The density of the Colloidal Silver can be measured with an electronic probe which can measure parts per million (PPM).
  • Please see the hundreds of videos on YouTube for more explanations of making Colloidal Silver